Recording Songs To A Computer (Sequencer) - Yamaha DGT7A Advanced Operation Manual

5
Press [>] until the c cursor is next
to the Delay In parameter, then
use the [–/NO] and [+/YES]
buttons to set it.
Option Description
ON A delay of 500 ms is applied to all
incoming MIDI data from the
computer so that the timing of the
piano and the internal XG tone
generator match for smooth
playback.
OFF The delay is not applied, and the
piano is played in "real time".
However, playback will not be
smooth. When Piano Rcv Ch is
set to ##, all channels are played
by the internal XG tone generator,
so Delay In is automatically set to
OFF.
For more information on the 500 ms delay
function, see "Controlling the Disklavier in
Real Time" on page 59.
6
Press [FUNC.] or [STOP] to return
to the normal display.
Recording Songs to a
Computer (Sequencer)
You can record keyboard and pedal data onto a
computer.
1
Press [FUNC.].
2
Press [>] until the c cursor is next
to the MIDI Setup option, then
press [ENTER].
The following display appears.
3
Press [>] until the c cursor is next
to the MIDI Out option, then
press [ENTER].
The following display appears.
See "Summary of the MIDI Out Parameter
in a Computer Setup" on pages 76 and 77
for details on the MIDI Out parameter.
4
With the c cursor next to the MIDI
Out parameter, press [>].
The "Out Ch" option is used to select the
MIDI channel on which the Disklavier will
transmit MIDI data. It can be set to OFF,
MIDI channels 1 to 16, or HP.
73