Keyboard Stand Assembly; Assembly Precautions; Moving/Installing - Yamaha ARIUS YDP-165 Owner's Manual

Keyboard Stand Assembly

YDP-165, YDP-145
YDP-S55, YDP-S35
Before assembling the instrument, be sure to read the
precautions below.

Assembly Precautions

CAUTION
• Assemble the instrument using at least two people.
• Assemble the instrument on a hard and flat floor with ample
space.
• Be sure to use the correct parts in the correct orientation,
and assemble the instrument in accordance with the
sequence given here.
• Keep small parts (such as screws) out of the reach of
infants. Children may accidentally swallow them.
• Be sure to use only the included screws of specified sizes.
Use of any other screws can cause damage or malfunction
of the product.
• To disassemble the unit, reverse the assembly sequence
given here.
Have a Phillips-head (+) screwdriver of the appropriate size
ready.
Post-assembly checklist
• There are no unused parts.
• The instrument is stable even if you shake it.
• The pedal adjuster is firmly pressed against to the floor
surface.
• Both the pedal cord and power cord are plugged
securely into the correct jacks.
→ If there are any items above you haven't confirmed,
review the assembly procedure and correct any errors.
page 34
page 37

Moving/Installing

When moving the instrument, be sure to keep the
instrument horizontal and hold with two or more people.
Do not subject the instrument to excessive vibration or
shock. After re-installation, check the assembly checklist.
If you move to another location, you can transport the
instrument along with other belongings. The unit can be
transported either assembled or disassembled.
We recommend that you place the instrument away
from the wall by about 5 cm to optimize and enhance
the overall sound even further.
CAUTION
Always hold the bottom of the main unit. Moving the unit by
holding any part other than the bottom may cause damage to
the unit or personal injury.
NOTICE
Rotate the adjuster under the pedal until it no longer touches
the floor surface before moving the instrument. The adjuster
can damage the floor.
Be sure to hold
the bottom.
Rotate the adjuster until
it no longer touches the
floor surface.
YDP-165, YDP-145, YDP-S55, YDP-S35 Owner's Manual
33