Yamaha DGT7A Advanced Operation Manual page 86

You selected a song using the remote
control's number pad, but the last song on
the disk is selected.
• If a song number higher than the last song
number on the disk is specified, the last song
will be selected.
A search time is specified using the remote
control, but the end of the song is selected.
• If a time value higher than the total length of
the song is specified, the end of the song will
be selected.
During playback, complex note trills and
faint pianissimo passages are occasionally
missed.
• Increase the Disklavier's volume level.
The Disklavier lowers the playback volume by
reducing the force applied to each hammer. So
for notes that are already quiet (pianissimo,
etc.), when the playback volume is reduced
there may not be enough force applied to a
hammer for it to strike the strings.
The metronome does not sound during
song playback.
• Check that the song uses a measures and beats
time format. If not, the metronome will not
sound.
When you play back a song you
downloaded from the internet, the volume
of the piano parts is too loud.
• Song data created for use with other electronic
instruments often include sound with high
velocity (loudness). Edit the volume of the
track containing high velocity.
See "Editing a Track's Voice & Volume" on
page 42.
PianoSmart
Pianosmart fails to work (fails to
synchronize).
• Check whether the CD is the same as the
number of the CD printed on the Smart
PianoSoft package, etc.
• When the songs are all the same even if the
CD is different, copy Smart PianoSoft onto the
memory disk, and execute "Change to a
different CD."
• When a copied CD and Smart PianoSoft are to
be played simultaneously, their playback
timing may not coincide.
Pedal
During playback, the pedals do not
operate.
• Check that the pedal cancel function is not set
to "PDoff."
• The sustain pedal is not made to move. Only
the internal mechanism operates.
See "Operating the Pedals Yourself" on page
41 in the Basic Operation Manual.
Tone Generator (Ensemble
Playback)
During Ensemble song playback, the
Ensemble parts cannot be heard.
• Make sure that the amp's volume control is set
to an appropriate level.
• Readjust the volume balance.
See "Balancing the Ensemble Volume (TG
Master Balance)" on page 26 in the Basic
Operation Manual.
The pitch of the Disklavier and internal
XG tone generator do not match.
• Use the TG Master Tune function to tune the
internal XG tone generator.
See "Tuning the Tone Generator (TG Master
Tune)" on page 48 in the Basic Operation
Manual.
The TG Master Balance function does not
adjust the volume of the internal XG tone
generator.
• Make sure that the BALANCE parameter is set
to OFF.
81