Ricoh C220S - Aficio SP Color Laser Administration Manual page 176

H
Click [Standard TCP/IP Port], and then click [Next >].
The [Add Standard TCP/IP Printer Port Wizard] dialog box appears.
I
Enter the printer's IPv4 address in the [Port Name] box, and then click [OK].
The IPv4 address you enter here is the address you have checked on the con-
figuration page.
The [Add Standard TCP/IP Printer Port Wizard] dialog box appears.
J
Click [Finish].
K
Check that the name of the printer whose driver you want to install is se-
lected, and then click [Next >].
L
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
M
Specify whether or not to share the printer, and then click [Next >].
N
Specify whether or not to print a test page, and then click [Next >].
O
Click [Finish].
The printer driver installation starts.
Note
❒ When you click [Finish], the [Digital Signature Not Found] dialog box may ap-
pear. To continue the installation, click [Yes].
❒ Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe" on the CD-ROM root directory.
❒ The printer driver with the selected language will be installed.
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
Reference
For details about checking the printer's IP address, see p.12 "Checking a
printer's IP address and MAC address".
Installing the Printer Driver under a Network Environment
1
11