Loading Paper; Loading Paper In Tray 1 - Ricoh C220S - Aficio SP Color Laser Administration Manual

Paper and Other Media

Loading Paper

This describes how to load paper into the paper tray and bypass tray.
R CAUTION:
• Do not pull out the paper tray forcefully. If you do, the tray might fall and
cause an injury.

Loading Paper in Tray 1

The following example explains loading procedure for the standard paper tray
(Tray 1). The same procedure can be used for the optional paper feed unit.
4
Important
❒ Make sure paper is not stacked above the limit mark inside the tray. Misfeeds
might occur.
❒ After loading paper in the tray, specify the paper type and size using Smart
Organizing Monitor.
❒ Do not mix different types of paper in the same paper tray.
❒ Do not move the side paper guides forcefully. Doing so can damage the tray.
❒ Do not move the end paper guide forcefully. Doing so can damage the tray.
❒ When inserting the tray, make sure it is not slanted. Inserting it at a slant can
damage the printer.
A
Lift and pull Tray 1 carefully, and then pull it out with both hands.
Place the tray on a flat surface.
34
ASH032S