Ricoh C220S - Aficio SP Color Laser Administration Manual page 118

Message
Cover Open
Close the indicated cover.
[Top or Front Cover]
Unit Not Detected
Open the indicated cover, and
then check the Toner Car-
tridge.
Top Cover : [Black]
Unit Not Detected
Open the indicated cover, and
then check the Toner car-
tridge.
Top Cover : [Magenta]
Unit Not Detected
Open the indicated cover, and
then check the Toner car-
tridge.
Top Cover : [Cyan]
Unit Not Detected
Open the indicated cover, and
then check the Toner Car-
tridge.
Top Cover : [Yellow]
Unit Not Detected
The Waste Toner Bottle is not
set, or is not set properly.
[Waste Toner Bottle]
Controller FW download
failed.
No Toner
The following toner has run
out.
Open the indicated cover, and
then replace the Toner Car-
tridge.
Top Cover : [Black]
Error & Status Messages on Smart Organizing Monitor
Explanation
The top cover or front cover is
open.
The indicated print cartridge
is not set correctly, or not set.
(Black)
The error message appears
even though the print car-
tridge is set correctly.
The indicated print cartridge
is not set correctly, or not set.
(Magenta)
The error message appears
even though the print car-
tridge is set correctly.
The indicated print cartridge
is not set correctly, or not set.
(Cyan)
The error message appears
even though the print car-
tridge is set correctly.
The indicated print cartridge
is not set correctly, or not set.
(Yellow)
The error message appears
even though the print car-
tridge is set correctly.
There is no waste toner bottle,
or the waste toner bottle is not
installed correctly.
Controller FW could not be
downloaded.
The printer is out of toner
(Black).
Recommended Action
Open and then close the top
cover or front cover.
Set the indicated print car-
tridge correctly.
(Black)
Using a dry cloth, carefully
wipe the interface area on the
print cartridge surface.
Set the indicated print car-
tridge correctly.
(Magenta)
Using a dry cloth, carefully
wipe the interface area on the
print cartridge surface.
Set the indicated print car-
tridge correctly.
(Cyan)
Using a dry cloth, carefully
wipe the interface area on the
print cartridge surface.
Set the indicated print car-
tridge correctly.
(Yellow)
Using a dry cloth, carefully
wipe the interface area on the
print cartridge surface.
Set the waste toner bottle cor-
rectly.
Wait for a while and do not
turn off the power.
Replace the print cartridge
(Black).
See p.51 "Replacing the Print
Cartridge"
7
73