Kyocera TASKalfa 3501i User Manual page 107

Edit Quick Print
preferred print job options.
e-MPS
system memory, so that you can print or reprint them later. Print jobs can easily be
reprinted later from the printing system's operation panel, and printing of sensitive
documents can be restricted to approved users.
Enable client profile
accessed by clients in a client/server environment. This feature in the Advanced tab
lets an administrator control and distribute profiles.
Fast printing
F
Finishing edge
sizes in a document. For example, the long edge of an A4 page is aligned with the
short edge of an A3 page; or the short edge of a letter size page is aligned with the
short edge of a legal size page. Finishing edge can be used with or without the staple
feature.
Full bleed
margins by printing to a larger sized-paper than the original, and then letting you trim
the edges.
GDI compatible mode
G
reproduces what is viewed on the screen using the Microsoft Graphical Device
Interface (GDI) component to render the document. It generates data in a raster
printing format, creating a larger printable file.
Grayscale
lightest.
Gutter
by scaling down text and graphics. This supports stapling and hole punching. When
used with Duplex printing, the enlarged blank space lines up evenly on both sides of
the sheet. The larger blank space is created by shifting the printable area to the right
or down as much as one inch (25.4 mm).
H Halftone screen
experienced user can adjust Halftone screen settings to create shades of gray in
graphic images. Larger dots spaced close together create darker shades, and smaller
dots spaced farther apart create lighter shades. Shading can be varied by adjusting
the number of rows of dots, the angle at which rows of dots are placed, and the shape
of the dots.
Ignore Application Collation
I
determines the priority of Collate settings. If the check box is selected, the printer
driver setting is used. If the check box is cleared, the software application setting is
used.
Index Tab Dividers
divide sections of a printed document. You can also print on the tabs. You can use
standard tab divider sheets for A4 and Letter paper, or you can create custom tabs for
those sizes. Tab divider sheets must be supplied from the MP tray and loaded on the
long edge, with the tabs away from the printing system.
Printer Driver
This feature lets you customize the Quick Print view with your
Job storage (e-MPS) is a set of options for saving print jobs in printing
Client profile refers to profile settings saved on a server and
Printing mode that decreases spool size and increases print speed.
Finishing edge aligns the matching sides of two different page
Layout feature that lets you produce full-page printing without any
A page description language option that accurately
Range of gray tones varying from black at the darkest to white at the
Blank space on the left side or top of a printed page that can be increased
Imaging process that breaks down an image into dots. An
Inserts tab divider sheets at specified points in a print job to
Check box in Device Settings > Compatibility that
ii