Kyocera TASKalfa 3501i Operation Manual page 9

Changing the Method for Overwriting the Entire Hard Disk
Change the method for overwriting the entire hard disk. Refer to Overwriting on page 2 for details.
NOTE:
The overwrite methods are used both for overwriting and hard disk initialization, and cannot therefore
be set individually.
Use the procedure below to select the interface.
System/Network - Data Overwrite Method
Select data overwrite method.
Once
Overwrite
Status
8
3-time Over-
write (DoD)
Cancel OK
02/02/2013 10:10
1
Press the [System Menu] key.
2
Press [System/Network].
3
If user login is disabled, the user authentication
screen appears. Enter your login user name and
password and then press [Login]. For this, you
need to log in with administrator privileges. Refer to
the machine's Operation Guide for the default login
user name and password.
4
Press [Next] of Data Security.
5
Press [Next] of Hard Disk Initialization.
6
Enter the security password. By default, the code is
set 000000.
7
Press [Change] of Data Overwrite Method.
8
Press [3-time Overwrite (DoD)] (default) or
[Once Overwrite].
9
Press [OK].