Kyocera TASKalfa 3501i Operation Manual page 5

Data security kit (e)

Hide thumbs Also See for TASKalfa 3501i:

The hard disk icon display changes as follows during overwriting

The table below shows the icons displayed and their descriptions.

CAUTION:

Do not turn the main power switch off while

NOTE:

If you turn the machine off at the main power switch during overwriting, data may not be overwritten

completely from the hard disk. Turn the machine back on at the main power switch. Overwriting automatically

resumes. If you accidentally turn the main power switch off during overwriting or initialization, the hard disk icon

might not switch to the second icon shown above. This would be caused by a possible crash or failed

overwriting of the data to be overwritten. This will not affect subsequent overwriting processes. However, hard

disk initialization is recommended so as to return to normal stable operations. (Initialization should be

performed by the administrator following the steps in System Initialization on page 9.)

Icon displayed

Description

There is unwanted data on the hard

disk.

Overwriting the unwanted data

The unwanted data is overwritten.

is displayed. The hard disk may be damaged.

Table of Contents