Kyocera TASKalfa 3051ci Technical Reference Manual page 227

Default States (DF)
Table 7.41. Default States (DF)
Function
Plotting mode
Polygon mode
Line type
Line pattern length
Scaling
Input window
Circle and arc resolution –
Symbol mode
Tick length
Mask value
Fill type
Fill spacing
Fill angle
Pen thickness
Label origin
Relative direction
Relative size
Character space
Character slant
Label buffer
Label terminator
Label origin
Character set
Standard character set
Code tolerance
Alternate character set
Initial Conditions (IN)
Table 7.42. Initial Conditions (IN)
Function
Default conditions
Scaling points
Coordinate system rotation RO;
Equivalent Instruction Default Value
PA; Absolute (plotter units)
PM0; PM2; Empty polygon
LT; Solid line
LTn,4; 4% of distance between P1 and P2
SC; Off (plotter units used for x- and y-coordinates)
IW; Set to hard-clip limits
5 degrees
SM; Off
TL; x-axis: 0.5 % of | P2y - P1y |
y-axis: 0.5% of | P2x - P1x |
IM233,0,0; All errors recognized, but no response to service request
or parallel port.
FT; Type 1 (bidirectional fill)
FT; 1% of distance between P1 and P2 (used only in fill types
3 and 4)
FT; 0 degrees
PT; 0.3 mm (fill spacing for fill types 1 and 2)
– Current pen position
DR1,0; Horizontal characters
SR; Character width: 0.75% of | P2x - P1x |
Character height: 1.5% of | P2y - P1y |
ES 0, 0; None
SL; 0 degrees
BL ETX; None
DT ETX; ETX (ASCII code 3)
LO; Position number
SS; Standard character set
CS0; Character set 0
CT; Angle mode of AA, AR, CI, or WG
CA0; Character set 0
Equivalent instruction Initial condition
DF;
IP;
HP 7550A Emulation [KC-GL] (Mode 8)
Default values
Initialized according to paper size
0 degrees (default setting)
7-115