Electrical Specifications
Table 2-13. V
Static and Transient Tolerance (Sheet 2 of 2)
CC
I
(A)
CC
120
125
Notes:
1.
The V
V
overshoot specifications.
CC
2.
This table is intended to aid in reading discrete points on
Processor E5300 Series,
3.
The loadlines specify voltage limits at the die measured at the VCC_DIE_SENSE and VSS_DIE_SENSE
lands and across the VCC_DIE_SENSE2 and VSS_DIE_SENSE2 lands. Voltage regulation feedback for
voltage regulator circuits must also be taken from processor VCC_DIE_SENSE and VSS_DIE_SENSE
lands and VCC_DIE_SENSE2 and VSS_DIE_SENSE2 lands.
4.
I
value greater than 90 A is not applicable for the Quad-Core Intel® Xeon® Processor E5300 Series.
cc
Figure 2-4.
Quad-Core Intel® Xeon® Processor E5300 Series V
Transient Tolerance Load Lines
VID - 0.000
VID - 0.020
VID - 0.040
VID - 0.060
VID - 0.080
VID - 0.100
VID - 0.120
VID - 0.140
VID - 0.160
Notes:
1.
The V
CC_MIN
overshoot specifications.
2.
Refer to
3.
Refer to
4.
The load lines specify voltage limits at the die measured at the VCC_DIE_SENSE and VSS_DIE_SENSE
lands and the VCC_DIE_SENSE2 and VSS_DIE_SENSE2 lands. Voltage regulation feedback for voltage
regulator circuits must also be taken from processor VCC_DIE_SENSE and VSS_DIE_SENSE lands and
VCC_DIE_SENSE2 and VSS_DIE_SENSE2 lands. Please refer to the appropriate platform design guide for
details on VR implementation.
Quad-Core Intel® Xeon® Processor 5300 Series Datasheet
V
(V)
CC_Max
VID - 0.150
VID - 0.156
and V
loadlines represent static and transient limits. Please see
CC_MIN
CC_MAX
Figure 2-5
0
5
10
15
20
25
V
CC
Typical
and V
loadlines represent static and transient limits. Please see
CC_MAX
Table 2-12
for processor VID information.
Table 2-13
for V
Static and Transient Tolerance
CC
V
(V)
CC_Typ
VID - 0.165
VID - 0.171
Figure 2-4
for Quad-Core Intel® Xeon® Processor X5300 Series.
Icc [A]
30
35
40
45
50
55
V
CC
Minimum
V
(V)
Notes
CC_Min
VID - 0.180
1, 2, 3, 4
VID - 0.186
1, 2, 3, 4
Section 2.13.2
for Quad-Core Intel® Xeon®
Static and
CC
60
65
70
75
80
85
V
CC
Maximum
Section 2.13.2
for
90
for VCC
31