Clear Ipv6 Ospf Process - D-Link DGS-6600-48TS Manual

DGS-6604 m

clear ipv6 ospf process

clear ipv6 ospf [PROCESS-ID] process
Syntax Description
PROCESS-ID
Default
Command Mode
Usage Guideline
Example
Switch > enable
Switch # clear ipv6 ospf process
CLI Reference Guide
To restart the state of IPv6 OSPF, use the clear ipv6 ospf process command.
(Optional) Internally used identification parameter for an IPv6 OSPF routing
process. It is locally assigned and can be any positive integer. A unique value is
assigned for each IPv6 OSPF routing process.
None
User EXEC
When the clear ipv6 ospf process command is used, the IPv6 OSPF database
is cleared and repopulated. Once the database is cleared and repopulated the
SPF algorithm will be performed.
Use the PROCESS-ID option to clear only one IPv6 OSPF process. If the
PROCESS-ID option is not specified, all IPv6 OSPF processes are cleared.
The following example restarts the SPF algorithm by clearing the IPv6 OSPF
processes from the database.
clear ipv6 ospf process
107