DGS-6604
m
show interface status err-disabled
show interface status err-disabled
Syntax
Description
Default
Command Mode
Usage Guideline
Example
Switch# show interface status err-disabled
Interface
Status
---------
-----------------
eth2.8
err-disabled
eth4.17
err-disabled
eth3.10
err-disabled
CLI Reference Guide
Use this command to display a list of interfaces in an error-disabled state, use
the show interfaces status errdisable command.
None
None
EXEC mode or any configuration mode.
You can use this command to verify which interfaces has been disabled because
of an error condition.
This example shows how to display the information about the error-disable
recovery timer.
Reason
--------------
loopback-detection
loopback-detection
loopback-detection
show interface status err-disabled
612