Lcd Mode - FujiFilm FinePix Z100fd Owner's Manual

CAUTION
Using the digital zoom allows you to enlarge your subject
and shoot it. However, it will lower your image quality. Set
the digital zoom when requiring it.

[LCD MODE]

Use this function to set the LCD monitor display to
standard mode or power save mode.
Z STANDARD
The images will be displayed finely on the monitor.
Be aware of the battery charge, since the camera
consumes more power.
Z POWER SAVE
When this function is active, you can save power and get
the maximum possible running time from your battery.
CAUTION
• The LCD MODE function is disabled during the High-
speed shooting mode, Playback mode, and Movie
mode.
• Select [POWER SAVE] when using the camera for a
long time in hot places. Using the camera in the
[STANDARD] setting in such circumstances may cause
vertical streaks on the LCD monitor due to CCD
characteristics.
How to use the [SET-UP] menu (➝p.103)
[VOLUME]
Use this function to adjust volume. The volume can be
selected from OFF, LEVEL 1, LEVEL 2, and LEVEL 3.
VOLUME VOLUME
SHUTTER VOLUME SHUTTER VOLUME
OPERATION VOL. OPERATION VOL.
PLAYBACK VOLUME PLAYBACK VOLUME
SET SET
A Select the volume type.
B Change the setting.
C Press MENU/OK to confirm the setting.
As for Playback volume, use no to adjust volume level
from 0 to 10.
VOLUME VOLUME
7
SET SET
CANCEL CANCEL
CANCEL CANCEL
Continued Q
109