FujiFilm FinePix Z100fd Owner's Manual page 138

Warning Displays
Warning Displayed
[CANNOT BE
TRANSMITTED]
[CANNOT BE
RECEIVED]
[PRINTER ERROR]
[PRINTER ERROR
RESUME?]
[CANNOT BE PRINTED]
138
Explanation
• An attempt was made to send a movie or an image
shot by the camera other than FinePix Z100fd (
is displayed).
• Transmission was disconnected during IR
communication.
Transmission was disconnected during IR
communication.
Displayed for PictBridge.
Displayed for PictBridge.
Displayed for PictBridge.
Remedy
• The image format is not transmittable.
• A movie can not be sent.
• Do not move the camera out of the transmission
distance. Do not place anything between the
transmitting and receiving devices.
Do not move the camera out of the transmission
distance. Do not place anything between the
transmitting and receiving devices.
• Check that the printer is not out of paper or out of
ink.
• Turn the printer off briefly and then turn it back on.
• Refer to the user manual supplied with your
printer.
Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.
• Refer to the user manual for the printer being used
and check whether the printer supports the JFIF-
JPEG or Exif-JPEG image format. If not, the printer
cannot print the images.
• Movie images cannot be printed.
• Was the image data photographed using FinePix
Z100fd?
You may not be able to print some images
photographed on other cameras.