Set-Up Menu Option - FujiFilm FinePix Z100fd Owner's Manual

[U SETUP]

SET-UP menu option

Setting
[ IMAGE DISP.]
[ FRAME NO.]
[ DUAL IS MODE]
[ ILLUMINATION]
[ DIGITAL ZOOM]
[ LCD MODE]
[ DATE/TIME]
[ VOLUME]
[ SOUND]
[ BLOG IMAGE SIZE]
[ LCD BRIGHTNESS]
104
Display Factory default
[3 SEC]/[1.5 SEC]/
[ZOOM
(CONTINUOUS)]
[CONT.]/[RENEW]
[ CONTINUOUS]/
[ SHOOTING
ONLY]
[ON]/[OFF]
[ON]/[OFF]
/
–
[SHUTTER VOLUME]/
[OPERATION VOL.]/
[PLAYBACK VOLUME]
[SHUTTER SOUND]/
[START UP SOUND]/
[OPERATION SOUND]
[% STANDARD]/
[$ SMALL]
–
Sets the way for displaying the check image screen
(photograph result) after taking a picture. The color
[1.5 SEC] tones in images recorded may differ from actual
color. Play back the recorded images to check
them.
Specifies whether frame numbers are assigned
[CONT.] consecutively from previous numbers or begin
again.
Specifies whether the Dual Image Stabilization
function is activated always at photography mode or
it is activated only when shutter button is pressed
down halfway.
Sets whether the illumination lamp lights at startup
[ON]
and after shooting is complete.
[OFF] Specifies whether digital zoom is used together.
Sets the LCD monitor display to the fine mode or
power save mode.
– Corrects the date or time.
Sets the volume of shutter volume, operation sound
– and playback volume.
Sets the sound of shutter volume, start up sound
– and operation sound.
Sets the size for blog image when the image is
%
saved or transmitted.
0 Sets the LCD monitor brightness.
How to use the [SET-UP] menu (➝p.103)
Explanation Page
106
107
108
108
108
109
24
109
110
82
110