Adjusting The Master Volume; Connecting Headphones Or External Speakers; Using A Pedal; Using The Music Rest - Yamaha PSR-I300 Owner's Manual

Setting Up

Adjusting the Master Volume

To adjust the volume of the entire keyboard sound,
use the [MASTER VOLUME] dial while playing the
keyboard.
CAUTION
• Do not use the instrument for a long period of time at a
high or uncomfortable volume level, since this can cause
permanent hearing loss.
Connecting Headphones or
External Speakers
Standard stereo
phone plug
Connect a pair of headphones to the [PHONES/
OUTPUT] jack. This jack also functions as an exter-
nal output. By connecting to a keyboard amplifier,
recorder, or other audio device, you can output the
audio signal of this instrument to that external device.
The speakers of this instrument are automatically
shut off when a plug is inserted into this jack.
CAUTION
• Do not use the instrument or headphones for a long period
of time at a high or uncomfortable volume level, since this
can cause permanent hearing loss.
• Before connecting an external device via the [PHONES/
OUTPUT] jack, turn off both the device and the instrument.
After connecting, set all volume levels to minimum, and
then turn on/off both the device and the instrument. When
turning on, turn on the instrument first, and then the
device; when turning off, turn off the device and then the
instrument. Otherwise, damage to the instrument and
device or electrical shock may occur.
NOTE
• When the [PHONES/OUTPUT] jack is connected, set the
Master EQ (page 49) to "3 Headphone. "
14
PSR-I300 Owner's Manual

Using a Pedal

By using a pedal, you can control one of four func-
tions in real time as you play: Sustain, Articulation
(page 20), Arpeggio (page 22) and Sostenuto (page
56). Make sure the footswitch (FC5 or FC4A; sold
separately) plugged into the [SUSTAIN] jack. By
default, Sustain is assigned, so that the sound can
be heard for a long time even if you take your finger
off the keyboard while pressing the foot switch, like a
damper pedal on a piano. To use a function other
than Sustain, use the function settings (Function 031;
page 56).
NOTE
• Plug or unplug the footswitch while the power is off. Also, do
not press the footswitch when turning the power on. Doing so
changes the polarity of the footswitch, resulting in reversed
operation.
• The sustain function does not affect Split Voices (page 17),
Style (automatic accompaniment; page 24) and Riyaz (page
32).

Using the Music Rest

Insert the music rest into the slots as shown.