Oki MC780 User Manual page 65

ORIGINAL SIZE
Set the scan size of the original.
AUTO: The size of the original is automatically
determined before the original is scanned.
MIXED Select this function to load the originals with
ORIGINAL different width into the RADF (Reversing
SIZES: Automatic Document Feeder).
Specified The original is scanned at the preset size
size: regardless of its actual size.
Memo
• If the recipient's fax machine is not capable of receiving
originals of B5 size, this equipment may reduce that size
before sending it. To avoid this, when the original to be set is
B5 size, specify A4 size respectively.
EXPOSURE
Set the density at which the original is to be scanned.
AUTO: This equipment automatically detects the
contrast of the original, and scans it with the
optimum density.
Manual:
Press or
contrast.
ECM
Switch the ECM (Error Correction Mode) communication ON or
OFF. ECM is an internationally standardized communication
mode that automatically corrects errors that occur during fax
transmissions. With this setting option ON, even when the
transmitted data have been affected by noise during
communication, this mode allows good communication without
image distortion by automatically resending the parts that have
been affected.
Note
• Both the sender and the receiver must have the ECM
function to make ECM communication available.
• When affected by noise during communication,
communication time is slightly longer than usual. Even when
the ECM communication is used, an error may occur
depending on the line status.
• The ECM communication is not available for voice
communication.
QUALITY TX
Switch Quality TX ON or OFF. When this mode is set to ON,
originals are sent at a slower speed than usual and the
chances of errors occurring decrease.
to set the desired
- 65 -
MAIL BOX COMMUNICATION
For the communication compatible with ITU-T (International
Telecommunications Union-Telecommunications) standards,
specify a subaddress or password to be sent to the recipient's
fax machine. (Up to 20 digits can be entered.)
SUB Information to send data of the original
(Subaddress): to the fax machine.
SEP (Selective Information to retrieve data of the
Polling): original from the fax machine.
SID (Sender Password for SUB.
Identification):
PWD (Password): Password for SEP.
Memo
• To use this function, the recipient's fax machine must be
capable of setting an ITU-T compatible subaddress or
password.
INTERNET FAX
SUBJECT: The subject of the Internet Fax
BODY: The body of the Internet Fax
This is not used for sending a standard fax.
SENDING/RECEIVING A FAX
1
2
3
4
5
6