Reverse this procedure to install the hard drive.
Secondary hard drive
NOTE:
The hard drive spare part kit includes left and right bracket rails, a connector cable, Mylar
cover with tab, and 4 rubber isolators.
Description
1-TB, 5400-rpm
750-GB, 5400-rpm
640-GB, 5400-rpm
500-GB, 7200-rpm
320-GB, 7200-rpm
250-GB, 7200-rpm
160-GB, SSD
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the primary hard drive cover (see
50
Chapter 4 Removal and replacement procedures
Battery on page
46).
Primary hard drive cover on page
Spare part number
603788-001
603787-001
603785-001
603784-001
603783-001
605606-001
603781-001
47).
ENWW