Secondary Hard Drive - HP ENVY 17 Maintenance And Service Manual

Secondary hard drive

NOTE: The hard drive spare part kit includes a hard drive bracket and hard drive connector cable.
Description
640-GB, 7200-rpm
500-GB, 7200-rpm
320-GB, 7200-rpm
1-TB, 5400-rpm
750-GB, 5400-rpm
640-GB, 5400-rpm
300-GB solid-state drive
160-GB solid-state drive
Hard Drive Hardware Kit (includes primary hard drive bracket and cable and secondary hard drive
bracket and cable)
Before removing the secondary hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive cover (see
6. Remove the memory module compartment cover (see
Battery on page 38).
Primary hard drive on page 39).
Memory module on page
Component replacement procedures
Spare part number
603786-001
603784-001
603783-001
603788-001
603787-001
603785-001
631146-001
603781-001
603772-001
43).
45