Secondary Hard Drive - HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Maintenance And Service Manual

Secondary hard drive

NOTE: The 6.35-cm (2.50-inch) secondary hard drive must be installed in the optical drive bay.
Installation of this drive in the hard drive bay is not supported. (This option is not available when the
optical drive is installed.)
Description
320-GB, 7200-rpm hard drive
250-GB, 5400-rpm hard drive
160-GB, 7200-rpm hard drive
160-GB, 5400-rpm hard drive
120-GB, 5400-rpm hard drive
Secondary hard drive cage assembly, includes additional USB port (required for
installation of secondary hard drive
Secondary hard drive connector board (required for installation of secondary hard drive)
Secondary hard drive system connector board (required for installation of secondary hard
drive)
NOTE: The optional secondary hard drive is installed in the optical drive bay, and replaces the
optical drive.
Before removing the secondary hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery. (See
5. Remove the switch cover and keyboard. (See
Remove the secondary hard drive:
1. Close the display, and position the computer upside down, with the right side toward you.
Battery on page 46)
Switch cover and keyboard on page
Spare part number
513949-001
513948-001
492564-001
513950-001
492561-001
492574-001
495027-001
495028-001
Component replacement procedures
62)
67