Secondary Hard Drive - HP EliteBook 8760w Maintenance And Service Manual

b. Lift the bracket (2) straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.

Secondary hard drive

NOTE: The hard drive bracket is included in the Hard Drive Hardware Kit, spare part number
642774-001.
Description
750 GB, 7200-rpm SATA hard drive
500 GB, 7200-rpm SATA hard drive
320 GB, 7200-rpm SATA hard drive
320 GB, 7200-rpm SATA SED hard drive
256 GB solid-state drive (includes bracket and screws)
128 GB solid-state drive (includes bracket and screws)
Before removing the secondary hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
56 Chapter 4 Removal and replacement procedures
Battery on page 45).
Service access cover on page
Spare part number
633252-001
634925-001
641672-001
626978-001
655027-001
655026-001
46).