Troubleshooting and Recovery
This section explains how to perform tasks related to recovering and troubleshooting problems on the remote system
using the CMC web interface.
•
Viewing chassis information.
•
Viewing the event logs.
•
Gathering configuration information, error status, and error logs.
•
Using the diagnostic console.
•
Managing power on a remote system.
•
Managing Lifecycle Controller jobs on a remote system.
•
Reset components.
•
Troubleshooting Network Time Protocol (NTP) problems.
•
Troubleshooting network problems.
•
Troubleshooting alerting problems.
•
Resetting forgotten administrator password.
•
Saving and restoring Chassis configuration settings and certificates.
•
Viewing error codes and logs.
Gathering Configuration Information, Chassis Status, and Logs
Using RACDUMP
The racdump subcommand provides a single command to get comprehensive chassis status, configuration state
information, and the historic event logs.
The racdump subcommand displays the following information:
•
General system/RAC information
•
CMC information
•
Chassis information
•
Session information
•
Sensor information
•
Firmware build information
Supported Interfaces
•
CLI RACADM
•
Remote RACADM
•
Telnet RACADM
racdump includes the following subsystems and aggregates the following RACADM commands. For more information
RACADM Command Line Reference Guide for CMC in PowerEdge VRTX .
about racdump, see the
17
169