Reinstalling Server Component Firmware; Rolling Back Server Component Firmware; Rolling Back Server Component Firmware Using The Cmc Web Interface; Upgrading Server Component Firmware - Dell PowerEdge VRTX User Manual

proper completion. After an operation has been submitted for scheduling, ensure that the confirmation message
indicating that the operation has been successfully scheduled is acknowledged.

Reinstalling Server Component Firmware

You can reinstall the firmware image of the currently installed firmware for selected components or devices across one
or more servers. The firmware image is available within the Lifecycle Controller.
Re-installing Server Component Firmware Using Web Interface
To reinstall a server component firmware:
1. In the left pane, click Server Overview → Update.
2. On the Server Component Update page, filter the component or device (optional).
3. In the Current Version column, select the option for the component or device for which you want to reinstall the
firmware.
4. Select one of the following options:
– Reboot Now — Restart the server immediately.
– On Next Reboot — Manually restart the server at a later time.
5. Click Reinstall. The firmware version is reinstalled for the selected component or device.

Rolling Back Server Component Firmware

You can install the firmware image of the previously installed firmware for selected components or devices across one
or more servers. The firmware image is available within the Lifecycle Controller for a rollback operation. The availability
is subject to the version compatibility logic of the Lifecycle Controller. It also assumes the previous update was
facilitated by the Lifecycle Controller.
NOTE: To use this feature, you must have an Enterprise License.

Rolling Back Server Component Firmware Using the CMC Web Interface

To roll back the server component firmware version to an earlier version:
1. In the left pane, click Server Overview→ Update.
2. On the Server Component Update page, filter the component or device (optional).
3. In the Rollback Version column, select the option for the component or device for which you want to roll back the
firmware.
4. Select one of the following options:
– Reboot Now — Restart the server immediately.
– On Next Reboot - Manually restart the server at a later time.
5. Click Rollback. The previously installed firmware version is reinstalled for the selected component or device.

Upgrading Server Component Firmware

You can install the next version of the firmware image for selected components or devices across one or more servers.
The firmware image is available within the Lifecycle Controller for a rollback operation. To use this feature, you must
have an Enterprise License.
54