Viewing Chassis Log; Using Diagnostic Console - Dell PowerEdge VRTX User Manual

NOTE: CMC creates a new log entry indicating that the log was cleared.
NOTE: To clear the hardware log, you must have the Clear Logs Administrator privilege.
Viewing Hardware Logs Using RACADM
To view the hardware log using RACADM, open a serial/Telnet/SSH text console to CMC, log in, and type:
racadm getsel
To clear the hardware log, type:
racadm clrsel

Viewing Chassis Log

CMC generates a log of the chassis-related events.
NOTE: To clear the chassis log, you must have the Clear Logs Administrator privilege.
Viewing Chassis Logs Using RACADM
To view the chassis log information using RACADM, open a serial, Telnet, SSH text console to CMC, log in, and enter the
following:
racadm chassislog view
This command displays the latest 25 chassis log entries.
To display the options available to view chassislogs, run the following command:
racadm chassislog help view
Viewing Chassis Logs Using the Web Interface
You can view, save, and clear the chassis log. You can filter the logs based on the log type and filter. Additionally, you
can even perform a search based on a keyword or view the logs on specified days.
In the left pane, click Chassis Overview → Logs → Chassis Log . The Chassis Log page is displayed.
To save a copy of the chassis log to your managed station or network, click Save Log and then specify a location save
the log file.

Using Diagnostic Console

You can diagnose issues related to the chassis hardware using CLI commands if you are an advanced user or a user
under the direction of technical support.
NOTE: To modify these settings, you must have the Debug Command Administrator privilege.
To access the Diagnostic Console:
1. In the left pane, click Chassis Overview → Troubleshooting → Diagnostics.
The Diagnostic Console page displays.
2. In the Command text box, type a command and click Submit.
For information about the commands, see the
The diagnostic results page appears.
Online Help.
173