Uploading Keytab File; Configuring Cmc Sso Login Or Smart Card Login For Active Directory Users Using Racadm - Dell PowerEdge VRTX User Manual

NOTE: For information about the options, see the
1. While configuring Active Directory to setup a user account, perform the following additional steps:
– Upload the keytab file.
– To enable SSO, select the Enable Single Sign-On option.
– To enable smart card login, select the Enable Smart-Card Login option.
NOTE: If these two options are selected, all command line out-of-band interfaces, including secure
shell (SSH), Telnet, Serial, and remote RACADM remain unchanged .
2. Click Apply.
The settings are saved.
You can test the Active Directory using Kerberos authentication using the RACADM command:
testfeature -f adkrb -u <user>@<domain>
where <user> is a valid Active Directory user account.
A command success indicates that CMC is able to acquire Kerberos credentials and access the user's Active
Directory account. If the command is not successful, resolve the error and run the command again. For more
Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference
information, see the
Guide on dell.com/support/manuals.

Uploading Keytab File

The Kerberos keytab file serves as the CMC's user name and password credentials to the Kerberos Data Center (KDC),
which in turns allows access to the Active Directory. Each CMC in the Kerberos realm must be registered with the
Active Directory and must have a unique keytab file.
You can upload a Kerberos Keytab generated on the associated Active Directory Server. You can generate the Kerberos
Keytab from the Active Directory Server by executing the ktpass.exe utility. This keytab establishes a trust relationship
between the Active Directory Server and CMC.
To upload the keytab file:
1. In the left pane, click Chassis Overview → User Authentication → Directory Services.
2. Select Microsoft Active Directory (Standard Schema).
3. In the Kerberos Keytab section, click Browse, select a keytab file, and click Upload.
When the upload is complete, a message is displayed indicating whether the keytab file is successfully uploaded or
not.
Configuring CMC SSO Login Or Smart Card Login For Active Directory Users Using
RACADM
In addition to the steps performed while configuring Active Directory, run the following command to enable SSO:
racadm -g cfgActiveDirectory -o cfgADSSOEnable 1
In addition to the steps performed while configuring Active Directory, use the following objects to enable smart card
login:
•
cfgSmartCardLogonEnable
•
cfgSmartCardCRLEnable
122
Online Help .