Cassette Operation - Sharp CD-BA1700H Operation Manual

CASSETTE OPERATION

TAPE 1 or TAPE 2 playback
1
2,5
4
PUSH
3
EJECT
TAPE 1
1
Press the ON/STAND-BY button to turn the power
on.
2
Press the TAPE (1 2) button.
3
Open the cassette door by pushing the area marked
"PUSH EJECT".
4
Load the cassette into the TAPE 1 or TAPE 2 cas-
sette compartment.
5
With cassettes in both decks, press the TAPE (1
button to switch operation from one deck to the
other.
6
Press the / button to start playback.


When playback is performed using the remote control,
press the TAPE 1 or TAPE 2
6
4
PUSH
EJECT
3
TAPE 2
To stop playback:
Press the
Fast forward/rewind: (TAPE 2 only)
1
2
Caution:
2)






button.
27
TAPE
6
1
(TAPE ) button.
Press the (TAPE ) button, then press the TAPE (1
2) button to select TAPE 2.
To advance the tape, press the
press the button.
To remove the cassette tape, press the
ton, and then open the cassette compartment.
Before changing from one tape operation to another,
press the (TAPE ) button.
If a power failure occurs during tape operation, the tape
head will remain engaged with the tape and the cassette
door will not open. In this case, wait until power is
restored.
6
2,5
button. To rewind it,
(TAPE ) but-