Sharp CD-BA1700H Operation Manual page 13

(Continued)


Disc number selection
1
When stopped, press the DISC SKIP button.
2
Press the / ( ) button.


The next disc playback will begin, after which each fol-
lowing disc will be played sequentially.
Notes:


When the DISC SKIP button is pressed during playback,
playback will begin automatically from the next disc. (It is
not necessary to press the


When one of the disc number buttons (
pressed during playback, playback of the selected disc
will begin automatically. (It is not necessary to press the
/ ( ) button.)
1
2
1
2
/ ( ) button.)
1 - 3) is
13


Cue and review
1
Load a disc and begin playback.
2
Hold down the button for audible fast forward,
and hold down the
reverse.
3
Normal playback will resume when the
ton is released.
CD
Notes:


When the end of the disc is reached whilst cueing, "END"
will appear in the display and CD operation will be
paused. (Even though the next disc has been loaded, the
disc will not be switched.) Press the
reverse or press the (CD ) button to stop CD opera-
tion.


If the beginning of the disc is reached whilst reviewing,
the mode will automatically switch to normal playback at
that point.


APSS (Auto Program Search System)
APSS automatically locates the beginning of any track.
To listen again to the track being played:
Press the button for less than 0.5 seconds during play-
back.
To move to the beginning of the next track:
Press the button for less than 0.5 seconds during play-
back.


To skip a number of tracks at one time, press the
button repeatedly until the desired track number is
shown.


To start playback from a desired track, press the
button whilst in the stop mode to select the track
number, and then press the
Note:


APSS can only search for music on a single disc.
button for audible fast
or but-
button for fast
or
or
/ ( ) button.