Remote Control; To Change The Brightness; Demo Mode - Sharp CD-BA1700H Operation Manual

Hide thumbs Also See for CD-BA1700H:
Table of Contents

Advertisement

(Continued)


Demo mode

When the AC power lead is first connected, the unit will
enter the demonstration mode.
To cancel the demonstration mode:
When the unit is in the stand-by mode (demonstration
mode), press the X-BASS/DEMO button.

The demonstration mode will be cancelled and the unit
will enter the low power consumption mode.
To return to the demonstration mode:
When the unit is in the stand-by mode, press the X-BASS/
DEMO button again.
(Main unit operation)
Note:
When the power is on, the X-BASS/DEMO button can be
used to select the extra bass mode.

To change the brightness of the display
Press the DIMMER button.

The display will be made dimmer.
To return to the original brightness:
Press the DIMMER button again.
(Main unit operation)


Remote control


When inserting or removing the batteries, push them
towards the

Installing the batteries incorrectly may cause the unit to
malfunction.

2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar)

Batteries are not included.
Precautions for battery use:

Insert the batteries according to the direction indicated in
the battery compartment.

Replace all old batteries with new ones at the same time.

Do not mix old and new batteries.

Remove the batteries if they are weak or if the unit will
not be used for long periods of time. This will prevent
When bright
potential damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery,
etc.).
When dark
Notes concerning use:

Replace the batteries if the operating distance is reduced
or if the operation becomes erratic.

Periodically clean the transmitter LED on the remote con-
trol and the sensor on the main unit with a soft cloth.

Exposing the sensor on the main unit to strong light may
interfere with operation. Change the lighting or the direc-
tion of the unit.

Keep the remote control away from moisture, excessive
heat, shock, and vibrations.
9
battery terminals.
0.2 m - 6 m
(8" - 20')

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-ba1700hGboxs0041awm1

Table of Contents