Cassette Operation - Sharp XL-530H Operation Manual

CASSETTE OPERATION

Cassette tape
Side A (1)
Tab for side B (2)
Tab for side A (1)
Tape playback
1
2
4
3
1
For playback, use normal or low-noise tape for
the best sound. (Metal or CrO
ommended.)
For recording, use only normal tape.
Do not use C-120 tapes, tapes with large di-
ameter reels, or poor-quality tapes, as they
may cause malfunctions.
Before loading a tape into the cassette com-
partment, tighten the slack with a pen or pencil.
Cassettes have removable tabs which prevent
accidental recording or erasing from taking
place. Removing the tab will protect the corre-
sponding side from being erased. Cover the
tab holes with adhesive tape to erase or record
again.
1
Press the ON/STAND-BY button to turn the
power on.
2
Press the FUNCTION button until "TP" ap-
pears in the display.
Press the TAPE button on the remote control.
5
3
Open the cassette door by pushing the area
marked "
4
Load the cassette into the cassette compart-
ment.
5
Press the
To stop playback:
Press the
Fast forward/rewind:
2
To advance the tape, press the
press the
ton, then press the
Caution:
When removing the cassette tape, press the
button, and then open the cassette compart-
ment.
5
Before changing from one tape operation to
another, press the
If a power failure occurs during tape operation,
the tape head will remain engaged with the
2
tape and the cassette door will not open. In
this case, wait until power is restored.
Even if the
playback, the unit will not enter the pause
mode.
10
tape is not rec-
2
7
PUSH EJECT".
0
button.
button.
button, then
button. To rewind, press the 3
button.
button.
0
button is pressed during tape
but-