Resetting The Microcomputer; Transporting The Unit; Maintenance - Sharp CD-BA1700H Operation Manual

RESETTING THE MICROCOMPUTER

Reset the microcomputer under the following condi-
tions:


To erase all of the stored memory contents (clock and
timer settings, and tuner and CD presets).


If the display is not correct.


If the operation is not correct.
1
Press the ON/STAND-BY button to enter the stand-
by mode.
2
Whilst pressing down the
BASS/DEMO button, hold down the ON/STAND-BY
button for at least 1 second.


"CLEAR AL" will appear.
ON/
STAND-BY
Caution:


The operation explained above will erase all data stored
in memory including clock and timer settings, and tuner
and CD presets.

TRANSPORTING THE UNIT

Before you move this product to a new location, pro-
ceed as follows:
1
Press the ON/STAND-BY button to turn the power
on.
2
Press the CD button.
3
Press the OPEN/CLOSE button to open the disc tray.


Remove all CDs inserted in the unit.
4
Press the OPEN/CLOSE button to close the disc
tray.


Make sure that "NO DISC" is displayed.
5
Press the ON/STAND-BY button to enter the stand-
by mode, and then unplug the AC power lead from
the AC socket.
ON/
STAND-BY
CD

MAINTENANCE

Internal care


Dirty heads, capstans or pinch rollers can cause poor
sound and tape jams. Clean these parts with a cotton
swab moistened with commercial head/pinch roller
cleaner or isopropyl alcohol.


After long use, the deck's heads and capstans may
become magnetised, causing poor sound. Demagnetise
these parts once every 30 hours of playing/recording
time by using a commercial tape head demagnetiser.
/ button and the X-
Read the demagnetiser's instructions carefully before
use.
X-BASS/
DEMO


External care


Periodically wipe the cabinet with a soft cloth and a
diluted soap solution, then wipe with a dry cloth.


Do not use chemically treated cleaning cloths or other
chemicals.
OPEN/
CLOSE
34
TAPE 1
TAPE 2