Cassette Operation - Sharp XL-30H Operation Manual

*XL-30H(SUK)P14-P18
Downloaded from: http://www.usersmanualguide.com/

CASSETTE OPERATION

Tape playback
1
2
4
3
1
14
1
Press the ON/STAND-BY button to turn the
power on.
2
Press the FUNCTION button until "TP" appears
in the display.
Press the TAPE button on the remote control.
3
Open the cassette door by pushing the area
5
marked "7 PUSH EJECT".
4
Load the cassette into the cassette compart-
ment.
5
Press the 0 button.
To stop playback:
Press the button.
Fast forward/rewind:
To advance the tape, press the 2 button. To re-
wind, press the 3 button.
Caution:
When removing the cassette tape, press the
button, and then open the cassette compartment.
Before changing from one tape operation to an-
other, press the
If a power failure occurs during tape operation,
the tape head will remain engaged with the tape
and the cassette door will not open. In this case,
wait until power is restored.
Even if the 0 / CD 6 button is pressed during
tape playback, the unit will not enter the pause
mode.
5
The pause mode is only active during synchro-
nised operation of the cassette deck and CD.
In the normal cassette mode, use the
2
14
button.
button.
00.2.8, 2:35 PM