Operations Are Not Possible When Messages Appear - Ricoh SGC 1506 Operating Instructions Manual

Operations are Not Possible When Messages Appear

This section explains likely causes of and possible solutions for messages that
appear and when the machine fails to operate.
Message
Updating desti-
nation list. Re-
select
destination(s)
or sender's name
later.
Cause
The destination list is being up-
dated from the network using
SmartDeviceMonitor for Admin.
Depending on the number of des-
tinations to be updated, there
may be some delay before you
can resume operation. Opera-
tions are not possible while this
message is displayed.
When You Cannot Send Scanned Files
Solution
Wait until the message disap-
pears. Do not switch off the pow-
er while this message is
displayed.
5
61