Maintaining Your Machine; Cleaning The Exposure Glass - Ricoh SGC 1506 Operating Instructions Manual

Maintaining Your Machine

If the exposure glass, exposure glass cover, ADF, or ARDF belt is dirty, copy
clarity may be reduced. Clean these parts if they are dirty.
R CAUTION:
• Fire and breakdown can result from heavy accumulation of dust inside this
machine. Consult your service representative for details about and charges
for cleaning the machine's interior.
Important
❒ Do not use chemical cleaners or organic solvents, such as thinner or benzene.
If such substances get inside the machine or melt plastic parts, a failure might
occur.
❒ Do not clean parts other than those explicitly specified in this manual. Other
parts should only be cleaned by your service representative.
❖ How to maintain
Cleaning the machine Wipe the machine with a soft, damp cloth, and then
wipe it with a dry cloth to remove the water.

Cleaning the Exposure Glass

This section explains how to clean the exposure glass and scanning glass.
Clean 1 and 2.
Maintaining Your Machine
8
123