User Authentication; User Code Authentication (Using The Control Panel); User Code Authentication (Using A Printer Driver); Login (Using The Control Panel) - Ricoh Type 2075 Operating Instructions Manual

Getting Started

User Authentication

When user authentication (User Code
Authentication, Basic Authentication,
1
Windows Authentication, or LDAP
Authentication) is set, the authentica-
tion screen is displayed. Unless a valid
user name and password are entered,
operations are not possible with the
machine. Log on to operate the ma-
chine, and log off when you are fin-
ished operations. Be sure to log off to
prevent unauthorized users from us-
ing the machine.
Note
❒ Consult the User Administrator
about your login user name, pass-
word, and user code. For details
about the various types of user au-
thentication, consult the appropri-
ate administrators.
❒ For user code authentication, enter
a number that is registered in the
Address Book as a login user name
as the user code.
User Code Authentication
(Using the Control Panel)
When user authentication is set, the
following screen appears.
Enter a user code (eight digit), and
then press [#].
8
User Code Authentication
(Using a Printer Driver)
When user authentication is set, spec-
ify the user code in the printer prop-
erties of a printer driver. For details,
see the printer driver Help.
Login (Using the Control
Panel)
Follow the procedure below to log in
when Basic Authentication, Windows
Authentication, or LDAP Authentica-
tion is set.
A A A A
Press [Enter] for [Login User Name].
B B B B
Enter a login user name, and then
press [OK].
C C C C
Press [Enter] for [Login Password].
D D D D
Enter a login password, and then
press [OK].
E E E E
Press [Login].
When the user is authenticated, the
screen for the function you are us-
ing appears.