When The Authentication Screen Is Displayed; User Code Authentication (Using The Control Panel) - Ricoh PG-C2 Operating Instructions Manual

Getting Started
When the Authentication Screen is
Displayed
1
This section explains the authentication screen.
Important
❒ Ask the user administrator for the login user name, login password, and user
code. For details about user authentication, contact your administrator.
❒ User code to enter on User Code Authentication is the numerical value regis-
tered in the address book as "login user name".
When Basic Authentication, Windows Authentication, LDAP Authentication, or
Integration Server Authentication is enabled, the authentication screen appears.
The machine is operable only if you enter a valid user name and password. If
User Code Authentication is enabled, you cannot use the machine until you en-
ter a valid user code.
If you are using the machine, you are "logged in". When you cannot use the ma-
chine, you are "logged out". To prevent use of the machine by unauthorized per-
sons, always log off when you have finished using the machine.
Note
❒ "
Authentication failed.
login user name and login password.

User Code Authentication (Using the Control Panel)

This section explains the procedure for logging in to the machine using the con-
trol panel while User Code Authentication is active.
If User Code Authentication is active, a screen prompting you to enter a user
code appears.
A
Enter a user code (one to eight digits), and then press the {OK} key.
Note
❒ To log out, press the operation switch.
22
" appears if the authentication failed. Check the