Ricoh Type 2075 Operating Instructions Manual page 123

❖ ❖ ❖ ❖ Memory Usage
You can select the amount of mem-
ory used in Font Priority or Frame
Priority, according to paper size or
resolution.
• Font Priority
This setting uses memory for
registering fonts.
• Frame Priority
This setting uses frame memory
for high speed printing.
Note
❒ Default: Frame Priority
❖ ❖ ❖ ❖ Duplex
You can select to have print on
both sides of each page.
• Off
• Long Edge Bind
• Short Edge Bind
Note
❒ Default: Off
❖ ❖ ❖ ❖ Copies
You can specify the number of
print sets. This setting is disabled if
the number of pages to print has
been specified with the printer
driver or another command.
• 1 to 999 by 1
Note
❒ Default: 1
❖ ❖ ❖ ❖ Blank Page Print
You can select whether or not to
print blank pages.
• On
• Off
Pages that match one of the follow-
ing conditions are identified as
blank.
• There are no images.
• There are images but they are
outside of the printable area.
Printer Features Parameters
• There are only blank characters.
Note
❒ Default: On
❒ The printer does not identify
pages with white-colored imag-
es as blank.
❖ ❖ ❖ ❖ Edge Smoothing
You can set this to enable Edge
Smoothing.
• On
• Off
Note
❒ Default: On
❒ If Toner Saving is set to On,
Edge Smoothing is ignored
even if it is set to On.
❖ ❖ ❖ ❖ Toner Saving
You can this to enable Toner Sav-
ing.
• On
• Off
Note
❒ Default: Off
❖ ❖ ❖ ❖ Spool Image
You can select to print spool imag-
es.
The print job transmitted from the
computer is temporarily stored on
the machine's hard disk as bitmap
images that can be printed when
transmission is complete.
If more than one print job is trans-
mitted, a spool image is printed for
each.
• Off
• On
Note
❒ Default: Off
5
117