Connecting The Camera To A Computer; For Windows Xp - Ricoh Caplio 400G wide Operation Manual

Connecting the Camera to a Computer

After installing the software on your computer, connect your camera to it.
While connecting the camera to a computer, do not press the ADJ. button.
Make sure the camera's power is off.
Connect the USB cable to the USB port of
your computer.
Turn the terminal cover knob of the cam-
era in the direction of the arrow to open
the cover.
Connect the USB cable to the USB termi-
nal of your camera.
Your camera turns on.
Chapter 2 Section 2 Downloading Images to a Computer

For Windows XP

In Windows XP, the first time you connect
your camera to the computer using a USB
cable, the [Found New Hardware Wizard]
screen will appear.
Select [Install from a list or specific loca-
tion (Advanced)].
Select [Next].
Select [Search for the best driver in these
locations.] -[Include this location in the
search] and then press the [Browse] but-
ton.
141