Using The Batteries - Ricoh Caplio 400G wide Operation Manual

Using the Batteries

Insert the batteries following these steps.
Make sure the camera power is off.
Turn the battery/card cover's knob toward
the mark to open the cover.
Insert the two batteries, making sure they
are facing the correct way.
When the batteries wear out
Just before the batteries wear out,
• Before opening or closing the cover, make sure that no contaminants adhere on the camera. Remove water, sand, or mud from it. Do
not open and close the cover in a place where such contaminants can easily get into the camera.
• Other batteries, such as manganese dry cell (R6) and Ni-Cd, cannot be used.
• With AA Alkaline Batteries (LR6), the number of shots may differ depending on the batteries.
• Please remove the batteries if you are not going to use it for a long period of time.
Close the battery/card cover and turn the
knob toward the
is displayed on the LCD Monitor. When this happens, replace the batteries with a fresh set.
12
Chapter 1 Section 1 Getting Started
mark.