Transferring The Camera Memo List To The Camera; Transferring From Listeditor - Ricoh Caplio 400G wide Operation Manual

Transferring the Camera Memo List to the Camera

Transferring from ListEditor

Make sure the camera is turned off.
Load an SD memory card for saving the
camera memo list.
Connect the provided USB cable to the
USB port of the computer.
Open the terminal cover of the camera
and insert the USB cable plug in the USB
port.
The camera is turned on. In this case, the LCD moni-
tor is held off but the flashing lamp and auto focus
lamp indicate that the camera power is on.
If file transfer from the camera to the computer starts
when the USB cable is connected, wait until the file
transfer ends.
Click the [Transfer to Camera] button on
the toolbar or click [Transfer to Camera]
on the [Tool] menu.
The camera memo list is saved in the SD memory
card loaded to the camera through the USB cable and
a message indicating successful transfer completion
appears.
Click the [OK] button.
Chapter 4 Section 2 Creating a Camera Memo List
Click [QUIT] on the [File] menu.
ListEditor closes.
You can also quit ListEditor by clicking the [x] (Close)
button in the upper-right corner of the screen.
Press the Power button of the camera to
turn off the camera.
Disconnect the USB cable between the
camera and computer.
Now, turning on the camera allows you to
use the camera memory list stored on the
memory card.
186