Connecting The Camera To A Computer - Ricoh Caplio 400G wide Operation Manual

Connecting the Camera to a Computer

After installing the software on your computer, connect your camera to it.
Make sure the camera's power is off.
Connect the USB cable to the USB port of
your computer.
Turn the terminal cover knob of the cam-
era in the direction of the arrow to open
the cover.
• To disconnect your camera from your computer:
1. Turn your camera off by pressing the power button.
2. Unplug the USB cable.
• When you are downloading images from your camera, the AC Adapter (sold separately) is recommended.
Chapter 3 Section 2 Downloading Images to a Computer
Open the terminal cover, and then con-
nect the USB cable to its USB terminal.
Your camera turns on.
173