Bsi (Blind Spot Information) - Acura 2012 ZDX Owner's Manual

uuWhen DrivinguBSI (Blind Spot Information)

BSI (Blind Spot Information)

Is designed to detect vehicles in specified alert zones adjacent to your vehicle,
particularly in harder to see areas commonly known as "blind spots."
When vehicles in adjacent lanes are approaching your vehicle from behind, the
appropriate indicator comes on, providing assistance when you change lanes.
■
How the system works
● The shift lever is in ( D
● Your vehicle speed is
between 6 mph (10 km/h)
and 100 mph (160 km/h)
Alert zone range
A: Approx. 1.6 ft. (0.5 m)
B: Approx. 10 ft. (3 m)
C: Approx. 10 ft. (3 m)
■
When the system detects a vehicle
BSI Alert Indicator: Located near the
outside rearview mirror on both sides.
Comes on when:
● A vehicle enters the alert zone from
behind to overtake you with a speed
difference of no more than 31 mph
(50 km/h) from your vehicle.
● You pass a vehicle with a speed difference of
no more than 12 mph (20 km/h).
Blinks when:
You move the turn signal lever in the direction
of the detected vehicle.
* Not available on all models
246
*
*
Radar Sensors:
or ( S .
underneath the
rear bumper
corners
1BSI (Blind Spot Information)
3
Failure to visually confirm that it is safe to
change lanes before doing so may result in
a crash and serious injury or death.
Do not rely only on the blind spot
information system when changing lanes.
Always look in your mirrors, to either side
of your vehicle, and behind you for other
vehicles before changing lanes.
Alert Zone
Important Safety Reminder
Like all assistance systems, BSI has limitations. Over
reliance on BSI may result in a collision.
The system is for your convenience only. Even if an
object is within the alert zone, the following
situations may occur.
Comes On
•
The BSI alert indicator may not come on due to
obstruction (splashes, etc.) even without the BLIND
SPOT NOT AVAILABLE multi-information display
appearing.
Blinks
•
The BSI alert indicator may come on even with the
message appearing.
*
WARNING