Indicator
Name
Seat Belt
Reminder
Indicator
Low Fuel Indicator
ABS (Anti-lock
Brake System)
Indicator
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
On/Blinking
Comes on and the beeper sounds if
●
you are not wearing a seat belt when
you turn the ignition switch to ON
*1
. If the front passenger is not
(
w
wearing a seat belt, the indicator
comes on about a few seconds later.
Blinks while driving if either you or
●
the front passenger has not fastened
a seat belt. The beeper sounds and
the indicator blinks at regular
intervals.
Comes on when the fuel reserve is
●
running low (approximately
2.9 U.S. gal./10.8 Liter left).
Blinks if there is a problem with the
●
fuel gauge.
Comes on for a few seconds when
●
you turn the ignition switch to ON
(
w
*1
, then goes off.
If it comes on at any other time, there
●
is a problem with the ABS.
Explanation
The beeper stops and the indicator
●
goes off when you and the front
passenger fasten their seat belts.
Stays on after you or the front
●
passenger has fastened the seat
belt - A detection error may have
occurred in the sensor. Have the
vehicle checked by a dealer.
2 Seat Belt Reminder P. 28
Comes on - Refuel your vehicle as
●
soon as possible.
Blinks - Have the vehicle checked by a
●
dealer.
Stays on constantly - Have the
●
vehicle checked by a dealer. With this
indicator on, your vehicle still has
normal braking ability but no anti-lock
function.
2 ABS (Anti-lock Brake System)
P. 255
uuIndicatorsu
Message
Continued
71