Table of Contents
Advertisement
L a n e K e e p i n g A s s i s t S y s t e m ( L K A S )
Alerts you if your vehicle begins to move out of a detected lane and helps with
steering operation. Available with Advance Package.
H o w I t W o r k s
A camera mounted between the windshield and the rearview mirror determines
if your vehicle begins to move away from the center of a detected lane while
driving between 45–90 mph.
If you cross a detected lane line without using your turn signal,
a message appears on the MID and a beep sounds. Steering
torque is applied to keep your vehicle in the middle of the lane.
LKAS may not activate under certain conditions. See your Owner's Manual
for more information.
T u r n i n g L K A S O n o r O f f
2. Press the LKAS button. Lane
outlines appear in the MID.
Dotted lane lines turn solid
when the system operates.
Press MAIN or the LKAS button
to turn the system off.
18
10
1. Press MAIN. LKAS appears in the MID.
B l i n d S p o t I n f o r m a t i o n ( B S I ) S y s t e m
Assists you in determining if there are detected vehicles in your blind spots. Available
with Technology and Advance Packages.
H o w I t W o r k s
A radar sensor under each corner of the rear bumper alerts you to a detected
vehicle in your left or right blind spots.
Minimum operating speed: 20 mph
When a vehicle is detected
in your blind spot, the blind
spot indicator turns on and
stays lit until the area is clear.
When your turn signal is on
and a vehicle is detected,
the blind spot indicator blinks
and a beep sounds until the
area is clear or the turn
signal is off.
C h a n g i n g S e t t i n g s
Choose alert types, or turn the system off.*
1. Press SETTINGS. Use the
interface dial to make and
enter selections.
2. Select Vehicle Settings.
3. Select Blind Spot Info.
4. Select an alert type or Off.
5. Press BACK to exit the menu.
*You can also change these settings using the
multi-information display (see page 6).
19
11
Advertisement
Table of Contents
