Blind Spot Information (Bsi) System; Parking Sensor System - Acura MDX 2014 Manual

14 MDX ATG_ATG Facing 3/29/2013 12:37 PM Page 20

BLIND SPOT INFORMATION (BSI) SYSTEM

Assists you in determining if there are detected vehicles in your blind spots. Available
with Technology and Advance Packages.
How It Works
A radar sensor under each corner of the rear bumper alerts you to a detected
vehicle in your left or right blind spots.
Minimum operating speed: 20 mph
When a vehicle is detected in
your blind spot, the blind spot
indicator turns on and stays lit
until the area is clear.
When your turn signal is on
and a vehicle is detected, the
blind spot indicator blinks and
a beep sounds until the area is
clear or the turn signal is off.
Changing Settings
Choose alert types, or turn the system off.*
20
All manuals and user guides at all-guides.com
1. Press SETTINGS. Use the
interface dial to make and
enter selections.
2. Select Vehicle Settings.
3. Select Blind Spot Info.
4. Select an alert type or Off.
5. Press BACK to exit the menu.
* You can also change these settings using the
multi-information display (see page 8).

PARKING SENSOR SYSTEM

Warns you of the proximity between your vehicle and nearby objects when parking or
backing up. Available with Advance Package.
How It Works
When the system senses an object, an indicator appears on the upper display
and a series of beeps sound. As you get closer to the object, the beep rate
increases.
Corner sensors
Within 24 in. (60 cm)
Indicators light
where the sensor
detects an obstacle
Turning the System On or Off
Press the parking sensor button. A green indicator light appears on the button
and a beep sounds when the system is on.
Rear center sensors
Within 59 in. (150 cm)
21