Indicator
Name
CRUISE MAIN
Indicator
*
CRUISE CONTROL
Indicator
*
Keyless Access
System Indicator
*
SH-AWD® (Super
Handling-All
Wheel Drive
TM
)
Indicator
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
On/Blinking
Comes on when you press the
●
CRUISE button.
Comes on if you have set a speed for
●
cruise control.
Comes on for a few seconds when
●
you change the power mode to ON.
Comes on as soon as a problem is
●
detected in the keyless access
system or keyless starting system.
Comes on for a few seconds when
●
you turn the ignition switch to ON
(
w
*1
, then goes off.
Comes on if there is a problem with
●
the SH-AWD® system.
Blinks when the differential
●
temperature is too high.
Explanation
2 Cruise Control* P. 232
2 Cruise Control* P. 232
Have your vehicle checked by a dealer.
●
Stays on constantly –the engine
●
drives the front wheels only in this state.
Have the vehicle checked by a dealer.
Blinks while driving – Stop in a safe
●
place, shift to P, and idle the engine
until the indicator goes off. If the
indicator does not stop blinking, take
your vehicle to a dealer.
2 SH-AWD® (Super Handling-All
Wheel Drive
TM
) P. 245
uuIndicatorsu
Message
—
—
Continued
77