Acura 2012 ZDX Owner's Manual page 323

Extension Bar
Wheel Nut
Wrench
Bracket
Wheel
Blocks
The tire to be replaced.
4. Put the extension bar with the wheel nut
wrench on the hoist shaft.
Turn the wrench to the left to lower the
spare tire to the ground.
5. Keep turning the wheel nut wrench to
create slack in the cable.
6. Remove the bracket from the spare tire.
7. Place a wheel block or rock in front and rear
of the wheel diagonal to the flat tire.
uuIf a Tire Goes FlatuChanging a Flat Tire
Continued 321