Table of Contents
Advertisement
■
When in Operation
The radar sensor monitors the distance between your vehicle and a vehicle ahead of
you. When the sensor detects a change in distance, the system compensates it by
accelerating or braking your vehicle in order to maintain the cruising speed you
previously set.
■
When ACC detects a
vehicle within ACC range:
a beeper sounds once and a
vehicle icon appears on the
multi- information display.
ACC Range: 328 ft. (100 m)
* Not available on all models
■
When the vehicle goes
out of ACC range:
a beeper sounds once and
the vehicle icon on the
multi- information display
becomes a dotted-line
contour.
Continued
uuWhen DrivinguACC (Adaptive Cruise Control)
1When in Operation
If the vehicle ahead of you slows down abruptly, or if
another vehicle cuts in front of you, the beeper
sounds and a message appears on the multi-
information display to alert you.
Depress the brake pedal, and keep an appropriate
distance from the vehicle ahead.
2 CMBS
TM
(Collision Mitigation Braking
System
TM
)
*
P. 257
If the CMBS
TM
has been turned off, there is no
audible or visible alert available.
Even if the distance between your vehicle and the
vehicle ahead is short, CMBS
TM
may not alert you or
ACC may start accelerating your vehicle under the
following circumstances:
•
The vehicle ahead of you is going at almost the
same speed as, or faster than your vehicle.
•
A vehicle cuts in front of you is going faster than
your vehicle, gradually distancing.
If you do not want to hear a beep when the system
detects a vehicle, or when the vehicle goes out of
ACC range, you can change the pre-running detect
car beep setting.
2 Customized Features P. 94
*
237
Advertisement
Chapters
Table of Contents
