Models with keyless access system
Message
Appears after the driver's door is opened when the
●
power mode is in ACCESSORY.
Appears when you take the keyless access remote out
●
of the vehicle and close the door while the power mode
is ON. The beeper sounds inside and outside the vehicle.
Appears when the keyless access remote battery
●
becomes weak.
uuIndicatorsuMulti-Information Display Warning and Information Messages
Condition
Explanation
Press the ENGINE START/STOP button twice with your
●
foot off the brake pedal to change the power mode to
VEHICLE OFF (LOCK).
Bring the keyless access remote back inside the vehicle,
●
and close the door.
The engine continues to run if you take the keyless
●
access remote out of the vehicle while the engine is
running. Once you change the power mode to OFF, the
engine does not start again unless you bring back the
remote inside the vehicle.
Replace the battery as soon as possible.
●
2 Replacing the Button Battery P. 310
Continued
85