Indicator
Name
Malfunction
Indicator Lamp
Charging System
Indicator
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
On/Blinking
Comes on when you turn the
●
ignition switch to ON
*1
, and
(
w
goes off either when the engine
starts or after several seconds if the
engine is not started. If "readiness
codes" have not been set, it blinks
five times before it goes off.
Comes on if there is a problem
●
with the emissions control system.
Blinks when a misfire in the
●
engine's cylinders is detected.
Comes on when you turn the
●
ignition switch to ON
, and
(
w
*1
goes off when the engine starts.
Comes on when the battery is not
●
charging.
Explanation
Readiness codes are part of the on board
●
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 354
Comes on while driving - Have the
●
vehicle checked by a dealer.
Blinks while driving - Stop in a safe
●
place where there are no flammable
objects. Stop the engine for 10 minutes
or more, and wait for it to cool down.
Then, take the vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 335
Stays on while driving - Turn off the
●
climate control system and rear defogger
in order to reduce electricity
consumption.
2 If the Charging System Indicator
Comes On P. 334
uuIndicatorsu
Message
Continued
69